Industrial Electronics
Industrial Electronics message board
Home   Forum   Glossary   SearchSearch   Log inLog in

Drive Technology For Sales Engineers and Distributors

Post new topicReply to topic Industrial Electronics Forum Index -> AC and DC drives
Author Message
engineer
Site Admin


Joined: 25 Mar 2006
Posts: 31

PostPosted: Mon Mar 27, 2006 5:40 am Post subject: Drive Technology For Sales Engineers and Distributors Reply with quote

Drive Technology For Sales Engineers and Distributors is name of a multi-hour series of courses offered by Bardac.

Here are the course series' outline:

Quote:
These courses assume a moderate degree of familiarity with the industrial process control market and basic computer literacy.
4a) Basic Drives Technology (1/2 hour)

* Principles of operation of AC Drives
* AC Drive terminology
* AC Volts/Hz, Sensorless (Open Loop) Vector and Closed Loop Flux Vector drives
* Principles of operation of DC Drives
* DC Drive terminology
* Selecting and comparing AC and DC drives for specific applications
* Safety procedures
* Equipment protection

4b) Optidrive - Industrial AC Drives (1 1/2 hour)

* Overview
* Horsepower ratings & typical applications
* Features and i/o
* Installation and start up configurations
* Optional features
* Communications and drive.web options
* AC inverter duty motor specification

4c) E-Series - Sensorless (Open Loop) Vector and Closed Loop Flux Vector drives (1 1/2 hour)

* Overview
* Horsepower ratings & typical applications
* Features and i/o
* Installation and start up configurations
* Optional features
* Vysta custom configuration software tools
* Communications and drive.web options
* AC vector duty motor specification

4d) PL-Series - Digital DC Drives (1 1/2 hours)

* Overview
* Horsepower ratings & typical applications
* Features and i/o
* Installation and start up configurations
* Optional features
* PL Pilot custom configuration software tools
* Communications and drive.web options
* DC motor specification

4e) Single Phase - DC Drives (1/2 hour)

* Overview
* Horsepower ratings & typical applications
* Features and i/o
* Installation and start up configurations
* Optional features
* Communications and drive.web options

4f) Routine maintenance of AC and DC drives and motors (1 hour)

* The importance of the operating environment
* Equipment safety considerations
* Spares holding policies
* Storage and organization of documentation and backup of configuration data files
* Where to find information when you need it

4g) drive.web introduction for Sales Engineers and Distributors (1 hour)

* drive.web distributed control technology overview
* create a "phantom" drive system with AC & DC drives
* navigate around drive block diagrams and drive systems
* identify object attributes
* connect parameters together
* monitor and set parameter values
* set user access levels and passwords
* show parameter value trend charts, etc.



For more information, contact Bardac at 1-888-667-7333 (toll free USA 888-ON SPEED)
Back to top
Display posts from previous:
Post new topicReply to topic Industrial Electronics Forum Index -> AC and DC drives All times are GMT
Page 1 of 1


Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum


Powered by phpBB 2001, 2005 phpBB Group