Shown above is cover of:
Audel Machine Shop Basics
Prev Book | Next Book
This book is just one of several titles in the category Trade and Journeymen. More titles like this book may be found here.
by: Rex Miller, Mark Richard Miller
Topics include: expansion chucking reamer, protractor dial, mineral lard oil, pull broaching, necking tool, push broaching, surface broaching, drill gage, chucking reamers, universal bevel protractor, drill press spindle, angle milling cutters, shell reamer, lip relief angle, machine reamers, collet holder, manufactured abrasives, surface gage, adjustable dies, taper shank, cutoff tool, cape chisel, taper reamer, hand reamers, center gage
HERE for more information and price
Use the right tool the right way Here, fully updated to include new machines and electronic/digital controls, is the ultimate guide to basic machine shop equipment and how to use it. Whether you re a professional machinist, an apprentice, a trade student, or a handy homeowner, this fully illustrated volume helps you define tools and use them properly and safely. It s packed with review questions for students, and loaded with answers you need on the job. Mark Richard Miller is a Professor and Chairman of the Industrial Technology Department at Texas AandM University in Kingsville, Texas. Understand basic machine shop practice and safety measures Recognize the variations in similar tools and the purposes they serve Learn recommended methods of mounting work in different machines Obtain a complete working knowledge of numerically controlled machines and the operations they perform Review procedures for safe and efficient use of cutting tools and cutters Expand your knowledge with clear, step-by-step illustrations of proper equipment set-up and operation
About the Author
Rex Miller was a Professor of Industrial Technology at The State University of New York, College at Buffalo for over 35 years. He has taught on the technical school, high school, and college level for well over 40 years. He is the author or co-author of over 100 textbooks ranging from electronics to carpentry and sheet metal work. He has contributed more than 50 magazine articles over the years to technical publications. He is also the author of seven civil war regimental histories.
Mark Richard Miller finished his BS degree in New York and moved on to Ball State University, where he obtained a masters degree and went to work in San Antonio. He taught in high school and went to graduate school in College Station, Texas, finishing a doctorate degree. He took a position at Texas A&M University in Kingsville, Texas, where he now teaches in the Industrial Technology Department as a Professor and Department Chairman. He has co-authored seven books and contributed many articles to technical magazines. His hobbies include refinishing a 1970 Plymouth Super Bird and a 1971 Roadrunner. He is also interested in playing guitar, an interest he pursued while in college as the lead guitarist of a band called The Rude Boys.
This book was a pleasure to find on Amazon. The authors cover all of the essential parts of a machine shop in a way that's really easy to read and understand. The book is an excellent reference.
Here's the table of contents from my copy of the book:
Chapter 1: Benchwork.
Chapter 2: Precision Measurement and Gaging.
Chapter 3: Materials.
Chapter 4: Abrasives.
Chapter 5: Grinding.
Chapter 6: Cutting Fluids.
Chapter 7: Cutting Tools.
Chapter 8: Cutter and Tool Grinders.
Chapter 9: Drills.
Chapter 10: Reamers.
Chapter 11: Taps.
Chapter 12: Threading Dies.
Chapter 13: Milling-Machine Cutters.
Chapter 14: Milling-Machine Arbors, Collets, and Adapters.
Chapter 15: Broaches and Broaching.
Chapter 16: Electrical Safety in the Machine Shop.
Top of Page