Industrial Electronics
Industrial Electronics message board
 
Home   Forum   Glossary   SearchSearch   Log inLog in

Intelligent Drive from Emerson

 
Post new topic   Reply to topic    Industrial Electronics Forum Index -> DC Drives
Author Message
engineer
Site Admin


Joined: 25 Mar 2006
Posts: 32

PostPosted: Sat Apr 15, 2006 5:59 pm    Post subject: Intelligent Drive from Emerson Reply with quote

Emerson's Mentor II is a DC drive which allows for simple, stand-alone applications that may be easily configured to control motor speed, voltage or current using standard internal settings. Set-up is done using the drive keypad, CTKP remote keypad, or MentorSoft, a Windows-based drive configuration tool. The Mentor II has an array of diagnostic and communication abilities that enhance system reliability. The drive’s standard microprocessor can eliminate the need for a PLC with integral functions such as thresholds, timers and logic gates that perform basic control.

The addition of the MD29, a 32-bit application
co-processor card, provides high-performance drive systems
with local intelligence for true distributed control. The MD29
enables users to incorporate custom or proprietary process
control application programs to their drive. The Mentor II also
provides a wide range of communication protocol options.
Mentor II systems may be used for web handling, winders, slitters, extruders, wire drawing, converting lines, and plastics production. The Mentor II’s integrated design and highly-programmable features make it a good choice for OEMs and System Integrators, as well as replacement or retrofit drives for End Users.





Typical Application:


* Microprocessor based Digital DC Drive
* 5.5 to 750 kW, 3 phase, 208 to 660 VAC
* Regenerative and non-regenerative models
* RS485 serial communications
* Extensive fieldbus communication capabilities
* Plug-in 32-bit application co-processor card
(MD29 and MD29AN)
* MentorSoft Windows-based

For more information, contact:

http://www.gotoemerson.com/
Back to top
engineer
Site Admin


Joined: 25 Mar 2006
Posts: 32

PostPosted: Tue Jan 09, 2024 1:43 am    Post subject: Emerson's Mentor Reply with quote

Emerson's Mentor II is a DC drive which allows for simple, stand-alone applications that may be easily configured to control motor speed, voltage or current using standard internal settings. Set-up is done using the drive keypad, CTKP remote keypad, or MentorSoft, a Windows-based drive configuration tool. The Mentor II has an array of diagnostic and communication abilities that enhance system reliability. The drive�s standard microprocessor can eliminate the need for a PLC with integral functions such as thresholds, timers and logic gates that perform basic control.
Back to top
Display posts from previous:   
Post new topic   Reply to topic    Industrial Electronics Forum Index -> DC Drives All times are GMT
Page 1 of 1

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum


Powered by phpBB © 2001, 2005 phpBB Group